|
SABER Cooling Technology You will see Reliability and Top Performance from all our SABER intercoolers. |
|
|
Dyno Proven Performance
|
LATEST RELEASE for 2006 Super Monster SABER Intercooler Drift Spec Front Mount kit SABER has spent 2 years time on the development and testing of the intercooler kit for the Ford XR6, and we finally completed the new SABER Intercooler Drift Spec Front Mount kit. The Dyno test was carried out for us by one of our Premium Installation Dealers in NSW Sydney, Surefloexhaust at Ingleburn. We used an Ex-Cop XR6 Turbo with over 100,000Km on the clock and did the following modifications: The car started with 176 rear wheel kw's and after our SABER Drift Spec Intercoole Kit was installed, the power straight away climbed up to a WHOPPING 206kw, that is a massive 17% power gain of 30kw (about 50kw power gain at the engine) with standard boost. Then with all the other mods finished, it left with 276 rear wheel kw's (371rwhp). The boost is now sitting around 12psi when the car is tuned at the end. Please have a look at the dyno sheet on the left. Further,
our
SABER Intercooler piping are all mandrel bent with the shortest
route possible, designed to allow faster and smoother air flow,
which means more power and better drivability. So, if you want your turbo car to go harder, faster, and at the same time stay reliable, fit our SABER Intercooler for the best “bang-for-your-buck” modification you can ever make!
|
Air
box and battery retained, fog lights retained and no cutting to front
reinforcement bar
Wiehrl International Pty Ltd
Copyright 2008 all rights reserved.
Ph: +61 2 9679 9744 OR see
Contact Details
Wiehrl International Pty Ltd has made every effort to provide the most accurate and up to date information on this website, however we can not be held responsible for any errors or omissions and we reserve the right to make changes without notice.