|
SABER Intercooler R-Spec Front Mount kit
SABER has spent 2 years time on the
development and testing of the intercooler kit for the Subaru GDB WRX / STi
00-05 WRX, and we finally completed the new SABER Intercooler R-Spec Front Mount kit. And our SABER Intercooler is one
of the largest commercially available system in the world to suit the
latest WRX / STi.
The SABER GDB WRX Kit was tested on an Australian spec MY01 Subaru WRX with the factory ECU
boost controller. The test day was a very hot
day, temperature was well over 30 degrees. And a base-line power run
was performed with the factory boost 13psi and the standard top mount
intercooler, it achieved 127.5kw at all 4 wheels.
After our SABER Intercooler R-Spec Front Mount kit was
installed, a MASSIVE intercooler size of nearly 3 times as big as
the original top mount item, 800 x 210 x 100mm to
provide maximum cooling capability and high flow efficiency, the turbo doesnt have to work as hard to create more
power. The power straight away climbed up to a WHOPPING
142.2kw at all 4 wheels with only 12 psi of boost, that is a
massive 12% power gain of 15kw through our SABER intercooler
alone (about 40kw power gain at the engine).
Please notice the power gains
from down low to mid rev range on the dyno graph, the turbo spools up much earlier with a
lot less lag which on the road represents much better
acceleration. All this WITHOUT even touching the factory boost
setting!
Further,
our
SABER Intercooler piping are all mandrel bent with the shortest
route possible, designed to allow faster and smoother air flow,
which means more power and better drivability.
Maximize power with less engine stress is the MAGIC of our SABER
intercooler kit.
So, if you want your turbo car to
go harder, faster, and at the same time stay reliable, fit our
SABER Intercooler for the best
“bang-for-your-buck” modification you can ever make!
This
SABER intercooler kit will fit all GDB WRX / STi 00-05
Fog
lights retained and no cutting to front reinforcement bar, 38mm bov fitting
included
SABER
stainless steel mesh air filter, high flow cold air intake pipe & Air
Flow Meter pipe included in the kit |